110V 120W Automatic Booster Pump for Home Use - High Pressure Water Pump for Shower System & Household Water Supply (Model W15GR-15A) | Perfect for Bathroom, RV, and Garden Irrigation

Specification Model W15GR-15B Voltage/Frequency 110V/60Hz Max Head 15m(49.2FT) Max Flow 25LPM(6.6GPM) Current 1.1A Rotate speed 3460RPM Capacitance 15 uf Insulation B Connection size on pump body NPT 3/4'' Size of union and flow switch NPT 3/4''*1/2'' Temperature 0-100℃(0-212℉ ) Wide Application This pump absolutely solves the lit fire properly of shower owing to the lower pressure and unreliable pressure. When the tap water is of low pressure, the pump can boost pressure. It can also boost pressure for solar water heaters, boost pressure and circulate water for industrial equipments, and increase oxygen for rearing ponds and fish tanks. GR hot-water pumps boost pressure and circulate hot water for boilers besides above using. GZ best feature is that it can suck tap water from one or two floor below directly. So it compeletely solves the problem that the higher floors do not have water while the lower floors have. Smart Control Box Smart Control Box,turn on the pump when you needed and shut off when you closed the faucet. Automatic FLow Switch Automatically adjusts to your needs,Increase the pressure of household. High Quality Copper Motor The coil uses 100% copper wire to ensure efficient and stable operation of the motor Advantage Double-faced impellerDouble ball bearingStainless steel rotorCopper Coil Suspension Motor TechnologyCan effectively solve the high temperature and noise generated by the high-speed operation of the motor. Easy to Installation Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbersSimple operation and save power.Automatically adjusts to your needs,Increase the pressure of household water tank and keep a steady pressure. Low Noise and Energy-Saving Automatically adjusts to your needs,Increase the pressure of household water tank and keep a steady pressure. Pressurize for solar water heaters, boost pressure and circulate water for water heater and Wall-hung stove. Package Content 1: 1* Booster Pump 2: 1* Flow Switch 3: 1* Brass Connector 4: 1* Teflon tape 5: 1 * Manual User *PLEASE NOTE: When the pump leaves the factory, a small amount of water may remain in the pump. This is due to strict tests on the pump to ensure quality and meet the testing standards. This does not mean that the pump has been used. 120W Domestic Automatic Booster Pump Best Choice for Household Booster Pressure Suitable for 2 room(bathroom or kitchen) , 2 to 4 faucets. Connection size: NPT 3/4" on pump ports, NPT 1/2" on unions, suitable to 1/2" pipe. A minimum inlet flow rate of 0.6 GPM is required to ensure automatic starting.Automatically adjusts to your needs,Increase the pressure of household water tank and keep a steady pressure. Feature Powerful 120W motor, Water flow switch and fittings included, All-in-one unit to make things easier for you.

1.Buy 1 pump, get 1 flow switches.

2.Suitable for 2 room(bathroom or kitchen) , 2 to 4 faucets. Connection size G 3/4" on pump ports, G 1/2" on unions, suitable to 1/2" pipe. A minimum inlet flow rate of 0.6 GPM is required to ensure automatic starting.

3.Noise Value 50 DB, the noise gets smaller when the faucet is open. The Max temperature the pump can afford is 100°C, the Max temperature the flow switch can afford is 60°C.

4.Note Before turning on the pump, please turn on the faucet to ensure that there is water flowing through the pump. When you turn off the faucet, the pump should stop automatically. If not, the water flow switch is broken. Please contact us and we will send a new flow switch for replacement immediately.

5. If you are not sure about the function and hesitate to order, please contact us before order, we will provide professional advice and suggest suitable products. The pump is not self-priming pump.